| • | Click on Print Now button at the bottom left corner of the window. |
| • | A window like showing above will open. Here you have a second chance to choose a paper type to print into. By default the previously selected paper type during Decorate step is selected. InAlbum 3.0 support majority of CD label paper available in store. You can also print into a standard A4 Paper, cut and glue it on your CD. |
| • | Once you select a paper on the list, click on the desired spot on the right hand preview. In the example above, there are 2 spots you can choose to print into. The one colored blue is the currently selected one. |
| • | Click OK when you have choosen a paper and a spot |
| • | Click Print now to start printing. |
| • | A printer window will open (as showing below). Remember that each printer has different window so you might not see it exactly like the one below. Make sure you look for a Page size listbox and select an A4 paper size. Most stock paper are A4 size. |
| • | Now to finally start printing, insert paper into the printer tray and click Print button at the bottom of this dialog box. The printing process may take between 10 seconds to 2 minutes depending on your printer. |
| • | Now that you finish printing the CD label, repeat Step 2, 3 for other pages you want to design and print. |
Make sure you select the right paper type for those pages.
What else can you do here?
| • | To print multiple copy |
Type in the number of copy in the Copy textbox below the print preview.
| • | To adjust the printing offset manually |
Printer is a very inacurate device. If you tell it to print at 4x6 inch, most likely it will not acurate within 0.2 inch. Example: you will get 4.2x6.2 inch rather than 4x6 inch. Each printer has different inacuracy value so it is imposible to adjust it automatically for all printer. To accomodate this problem, InAlbum 3.0 lets you specify a correction to be added to printing offset and printing size. To do this, click Adjust printer offset button.
Here you can add correction offset to the left/top/right/bottom of printing area. Eg: If the left side of print out is a little bit to the right by 3mm. Then type in -3mm to the Left textbox.
| • | Once you happy with the adjustment, click OK button. |